Alpine Motor Sports

  • 720 Tyler Ave
  • Kremmling, CO 80459
  • Call Us: (970) 724-9655
  • https://www.alpinemotorsportsinc.com/
Print This Page

2022 Yeti SnowMX 137 MT Base

Retail Price

$8,849.00

Information

2022 Yeti SnowMX 137 MT

Head out on high horsepower hill climbs and deep snow adventures with the new 2022 137 MT. Stronger flotation and more agile than ever, so you can reach higher peaks and navigate tighter tree lines.

Climb to the top... and don't stop!

The YETI 137 MT is the new king of the hill with our next generation full-width track mounted on a narrow rail chassis with taller 2.6" lugs for maximum flotation and agility. We've upgraded the suspension and shed weight, not strength, so you can eat up the steepest slopes and power through the deepest powder.

Features may include:

  • Shed over 1 pound* without losing traction no matter the angle, no matter the conditions with the NEW deeper 2.6" cup-shaped SNOWBIKE track.
  • Tear it up in the meadows or soak up the slopes. The NEW stage 3 ELKA shock is calibrated for smooth riding in rough conditions.
  • Ride harder, longer with better shock support from upgraded shock bearings and larger lower shock spacers.
  • Stronger resistance to obstacles with 25 mm extra ground clearance, our NEW syncrodrive casing made of a cold impact modified nylon.
  • Track

Maximize available HP and increase track speed with our next generation 129" track, combining a 12.5" wide track with a narrow 5.5" rail chassis and taller 2.6" cup-shaped lugs for improved flotation and agility.

  • Syncrodrive

Increased impact resistance with our new syncrodrive casing made of a cold impact modified nylon. The optimized geometry provides a better ground clearance and shock absorption.

  • Spindle

Greater ski control, less drifting and better flexion / torsion rigidity from bike-to-bike with our new aluminium spindle geometry.

  • Adaptability

Simplified adaptability on rear bike mounts and front spindle for precise fitment from bike-to-bike.

  • Elka Shock - Stage 3

Maximize the entire stroke in all conditions with revised spring and valving calibration. Adjust compression at low speeds for a smooth transition to different riding styles.

  • Universal Soft Strut

Sustain deep snow performance under heavy load with 1/2" movement from our industry first "soft strut". 30mm micro adjustments to tune your track and macro adjustments for different bike setups.

  • Rear Reactor Arm

Higher load capacity made possible with a redesigned front a-arm upper cross tube and shock bracket. Improved track rolling efficiency and reduced power loss at all speeds with new anti-stab boogie wheels.

  • No-Slip Drivers

Avoid ice buildup with higher load capacity at lower track tension.

  • Brake System

Optimal braking performance through the HAYES pre-bleed brake system. Factory-calibrated 11 mm master cylinder and break caliper for a progressive and smooth brake feel, reduced installation time and no bleeding needed.

Photos

Highlights

  • Kremmling, Colorado
  • 2022
  • Yeti SnowMX
  • 137 MT Base
  • Carbon Fiber
  • Available
  • 12.5”
  • Lug: 2.6"

Specifications

  • 2022
  • Yeti SnowMX
  • 137 MT
  • Base
  • Mountain
  • 1 1/16" Hex, Titanium, 7 tooth Anti-ratchet sprocket | Spocket: 16 tooth- Splined
  • New track (9429S)
  • Slider: Standard POM | Automatic Tensioner: Standard POM | Drive: DID520VOX 60 or 62 Link (master link)
  • Carbon Fiber
  • Elka shock Stage 3 (new calibration)
  • Elka shock Stage 3 (new calibration)
  • Arm: Powder coated steel w/ STRENX reinforcements
  • 6061-T6 Aluminium reactor arms
  • 16.0" (40 cm)
  • Hayes V32 - Dual Piston Caliper, sheilded rotor with anti-rattle pad clip
  • Pitch: 2.86” | Rail Spacing: 5.5”
  • 73”
  • 20”
  • 16”
  • 137” | Ski: 42" (106.68 cm)
  • Lug: 2.6"
  • 12.5”
  • Front: 17.9 lb | Rear: 99 lb
  • Master Cylinder: Hayes pre-bled, Right Hand, 11mm piston | Hadware & Fasteners: Titanium, Anodized Aluminum & Stainless Steel | Strut: Fully Ajustable Soft Strut | Ski Material: UHMW | Skag Type: Hardox, Zinc Plated
  • Parabolic design, 20" Radius
  • Mitsubishi 28 mm Width/896 mm length | Quick Access Drive: LEXAN | Upper Syncrodrive Drive Gear: 41 tooth- Splined | Lower Syncrodrive Gear: 47 tooth- Splined